dmesg - Dell Vostro Jesper
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000a9d19fff] usable
BIOS-e820: [mem 0x00000000a9d1a000-0x00000000a9f1bfff] reserved
BIOS-e820: [mem 0x00000000a9f1c000-0x00000000b8dcefff] usable
BIOS-e820: [mem 0x00000000b8dcf000-0x00000000baeeefff] reserved
BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Vostro 3360/07X5MJ, BIOS A04 05/10/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FF800000 mask FFF800000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0BC000000 mask FFC000000 uncachable
4 base 0BB000000 mask FFF000000 uncachable
5 base 100000000 mask FC0000000 write-back
6 base 13F800000 mask FFF800000 uncachable
7 base 13F600000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xbaffffff]
[mem 0x00000000-0xbaffffff] page 2M
kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fffc000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x13f5fffff]
[mem 0x100000000-0x13f5fffff] page 2M
kernel direct mapping tables up to 0x13f5fffff @ [mem 0xb8dcd000-0xb8dcefff]
RAMDISK: [mem 0x36122000-0x37088fff]
ACPI: RSDP 00000000000f0120 00024 (v02 DELL )
ACPI: XSDT 00000000baffe170 00094 (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: FACP 00000000bafee000 000F4 (v03 DELL QA09 00000002 LOHR 00000002)
ACPI: DSDT 00000000baff1000 09DAE (v02 DELL IVB-CPT 00000000 INTL 20061109)
ACPI: FACS 00000000baf7c000 00040
ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)
ACPI: BOOT 00000000baffc000 00028 (v01 00000001 PTL 00000001)
ACPI: SSDT 00000000baffb000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 00000000baff0000 000A5 (v32 DELL QA09 00000002 LOHR 00000002)
ACPI: HPET 00000000bafed000 00038 (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: APIC 00000000bafec000 00098 (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: MCFG 00000000bafeb000 0003C (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: SSDT 00000000bafea000 008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000bafe9000 00A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 00000000bafe8000 0003E (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: POAT 00000000bafe6000 00055 (v03 DELL QA09 00000002 LOHR 00000002)
ACPI: UEFI 00000000bafe5000 0027E (v01 DELL QA09 00000002 LOHR 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
NODE_DATA [mem 0x13f5fb000-0x13f5fffff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xa9d19fff]
node 0: [mem 0xa9f1c000-0xb8dcefff]
node 0: [mem 0xbafff000-0xbaffffff]
node 0: [mem 0x100000000-0x13f5fffff]
On node 0 totalpages: 1015642
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 11752 pages used for memmap
DMA32 zone: 740325 pages, LIFO batch:31
Normal zone: 4056 pages used for memmap
Normal zone: 255528 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000a9d1a000 - 00000000a9f1c000
PM: Registered nosave memory: 00000000b8dcf000 - 00000000baeef000
PM: Registered nosave memory: 00000000baeef000 - 00000000baf9f000
PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
PM: Registered nosave memory: 00000000ff980000 - 0000000100000000
e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s85056 r8192 d21440 u262144
pcpu-alloc: s85056 r8192 d21440 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 999764
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3898480k/5232640k available (7006k kernel code, 1170072k absent, 164088k reserved, 6238k data, 992k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
NR_IRQS:16640 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1696.217 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.43 BogoMIPS (lpj=6784868)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20121018
ftrace: allocating 26689 entries in 105 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (13569.73 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 2 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000bae8e018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000bae8fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000bae8dd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
_OSC request data:1 8 1f
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xd0600000-0xd060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xd0615000-0xd061500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xd061a000-0xd061a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xd0610000-0xd0613fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xd0619000-0xd06193ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0x3098-0x309f]
pci 0000:00:1f.2: reg 14: [io 0x30bc-0x30bf]
pci 0000:00:1f.2: reg 18: [io 0x3090-0x3097]
pci 0000:00:1f.2: reg 1c: [io 0x30b8-0x30bb]
pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 24: [mem 0xd0618000-0xd06187ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xd0614000-0xd06140ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
pci 0000:01:00.0: reg 10: [mem 0xd0500000-0xd057ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:02:00.0: [1969:1091] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xd0400000-0xd043ffff 64bit]
pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
_OSC request data:1 1f 1f
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xa9d1a000-0xabffffff]
e820: reserve RAM buffer [mem 0xb8dcf000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x1000-0x1003] has been reserved
system 00:03: [io 0x1004-0x1013] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x0400-0x0453] has been reserved
system 00:03: [io 0x0458-0x047f] has been reserved
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x0454-0x0457] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs DLL055c PNP0f13 (active)
pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs SMO8810 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfa00000-0xbfafffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xbfa00000-0xbfa0ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0500000-0xd05fffff]
pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfafffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xd0400000-0xd04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
pci_bus 0000:01: resource 2 [mem 0xbfa00000-0xbfafffff pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd0400000-0xd04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15772k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb4dcd000-0xb8dcd000] (64MB) mapped at [ffff8800b4dcd000-ffff8800b8dccfff]
Simple Boot Flag at 0x66 set to 0x1
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1369920838.548:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.20)
msgmni has been set to 7645
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP0] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (57 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (57 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd061a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: setting latency timer to 64
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0619000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
rtc_cmos 00:04: setting system clock to 2013-05-30 13:33:59 UTC (1369920839)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1176k freed
Freeing unused kernel memory: 1080k freed
udevd[108]: starting version 175
Disabling lock debugging due to kernel taint
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd0618000 port 0xd0618100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ATA-8: ST320LT007-9ZV142, 0005DEM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST320LT007-9ZV14 0005 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1696.146 MHz
Switching to clocksource tsc
usb 3-3: new high-speed USB device number 2 using xhci_hcd
usb 3-3: New USB device found, idVendor=0951, idProduct=1643
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: DataTraveler G3
usb 3-3: Manufacturer: Kingston
usb 3-3: SerialNumber: 001CC0EC350FFB80960123BF
usb 3-3: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 3-3: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
Initializing USB Mass Storage driver...
scsi6 : usb-storage 3-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 1-1.1: New USB device found, idVendor=138a, idProduct=0011
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-1.1: SerialNumber: 671fbb27e69a
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: USB2.0-CRW
usb 1-1.3: Manufacturer: Generic
usb 1-1.3: SerialNumber: 20100201396000000
usb 1-1.5: new high-speed USB device number 5 using ehci-pci
usb 1-1.5: New USB device found, idVendor=0c45, idProduct=6449
usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-1.5: Product: Laptop_Integrated_Webcam_E4HD
usb 1-1.5: Manufacturer: 001D601D9DBB-C607-160829
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: string descriptor 0 read error: -22
usb 2-1.5: New USB device found, idVendor=0cf3, idProduct=e003
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] No Caching mode page present
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
Adding 4062204k swap on /dev/sda5. Priority:-1 extents:1 across:4062204k
udevd[345]: starting version 175
lp: driver loaded but no devices found
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wmi: Mapper loaded
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 42 for MSI/MSI-X
input: Dell WMI hotkeys as /devices/virtual/input/input5
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver
alx 0000:02:00.0: alx(5c:f9:dd:40:a5:4c): Qualcomm Atheros Ethernet Network Connection
[drm] Initialized drm 1.1.0 20060810
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
cfg80211: Calling CRDA to update world regulatory domain
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03 50, EC=73 02 02
fbcon: inteldrmfb (fb0) is primary device
Linux video capture interface: v2.00
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
scsi7 : SCSI emulation for RTS5139 USB card reader
usbcore: registered new interface driver rts5139
scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:6449)
input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
acpi device:33: registered as cooling_device4
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004900000, irq=16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
type=1400 audit(1369913647.083:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=689 comm="apparmor_parser"
type=1400 audit(1369913647.083:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
type=1400 audit(1369913647.083:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
type=1400 audit(1369913647.083:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=689 comm="apparmor_parser"
type=1400 audit(1369913647.083:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
type=1400 audit(1369913647.083:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
type=1400 audit(1369913647.083:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=689 comm="apparmor_parser"
type=1400 audit(1369913647.083:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
type=1400 audit(1369913647.083:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
init: failsafe main process (860) killed by TERM signal
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: avahi-cups-reload main process (913) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ppdev: user-space parallel port driver
type=1400 audit(1369913650.631:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=932 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
alx 0000:02:00.0: irq 45 for MSI/MSI-X
alx 0000:02:00.0: irq 46 for MSI/MSI-X
alx 0000:02:00.0: irq 47 for MSI/MSI-X
alx 0000:02:00.0: irq 48 for MSI/MSI-X
alx 0000:02:00.0: irq 49 for MSI/MSI-X
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full
audit_printk_skb: 3 callbacks suppressed
type=1400 audit(1369913655.723:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1170 comm="apparmor_parser"
type=1400 audit(1369913655.723:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1170 comm="apparmor_parser"
type=1400 audit(1369913655.723:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1170 comm="apparmor_parser"
type=1400 audit(1369913655.759:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1168 comm="apparmor_parser"
type=1400 audit(1369913655.759:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1168 comm="apparmor_parser"
type=1400 audit(1369913655.771:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1167 comm="apparmor_parser"
type=1400 audit(1369913655.771:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1167 comm="apparmor_parser"
type=1400 audit(1369913655.775:20): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1174 comm="apparmor_parser"
type=1400 audit(1369913655.775:21): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1174 comm="apparmor_parser"
type=1400 audit(1369913655.783:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1169 comm="apparmor_parser"
init: alsa-restore main process (1208) terminated with status 99
init: anacron main process (1220) killed by TERM signal
usb 3-3: USB disconnect, device number 2
alx 0000:02:00.0 eth0: NIC Link Down
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full
alx 0000:02:00.0 eth0: NIC Link Down
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full
alx 0000:02:00.0 eth0: NIC Link Down
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full
alx 0000:02:00.0 eth0: NIC Link Down
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full
alx 0000:02:00.0 eth0: NIC Link Down
alx 0000:02:00.0 eth0: NIC Link Up: 100 Mbps Full